Fasteners and posts

Information on fastening posts, railings, fences and gates.

Fence and post fastening

How are the steel posts attached?

Depending on your local circumstances, you can choose between

Screw-on posts
Concrete-in posts

No, our fence posts do not have pre-drilled holes, as these must be individually drilled to compensate for uneven ground or slopes.

Our assembly instructions provide detailed guidance on how to assemble posts for screwing on. You can find them here.

Our assembly instructions provide detailed guidance on how to install posts for concreting in. You can find them here.

The following tools and accessories are required for assembly:

Spirit level (ideally two magnetic spirit levels)
Drill with M8 tap
galvanised M8 x 25 mm screws with nuts and washers for attaching the fence panel to the slotted screws

You will need the following accessories to set your posts in concrete:

Concrete
Spade & Shovel
Wooden Blocks for Supports
Wooden Slats
String for Positioning the Posts
Gravel for Drainage

The fence line you require is not adjusted by the posts. The line can be adapted to your existing conditions by shortening individual fence panels.

The delivery includes only the requested quantity of fence panels. The necessary slotted screws can also be ordered from us.

The following tools and accessories are required for assembling your fence: - Spirit level (ideally two magnetic spirit levels) - Drill with M8 tap - galvanised M8 x 25 mm screws with nuts and washers for connecting the fence panel to the slotted screws

Spirit level (ideally two magnetic spirit levels)
Drill with M8 tap
galvanised M8 x 25 mm screws with nuts and washers for attaching the fence panel to the slotted screws

The tabs of the fence elements and the slotted screws are to be connected with M8 hex bolts, nuts and washers.

Our assembly instructions provide detailed guidance on how to assemble fence panels. You can find them here.

Railing attachment

What types of posts are available for railings?

Our railing posts are 5 x 5 cm and are manufactured with tabs. Depending on the situation, you can choose between...

Corner posts – mounting brackets are attached at a 90° angle
End posts – mounting brackets are attached on one side
Intermediate posts – mounting brackets are attached on both sides.

Railings are important elements for fall protection. To avoid any risk, we recommend installation by a professional.

At ELEO Express, we offer screw-on posts to match your balcony or terrace railing. Should you require a different mounting option, please contact our customer service.

The railings from ELEO Express can be attached to the house wall using L-brackets. It's best to seek advice from a hardware store regarding this.

The delivery includes only the requested quantity of railing elements. Matching railing posts can be ordered under Posts & Accessories.

To match our balcony and terrace railings, we offer our bolt-on railing posts. Our railing posts are always manufactured with welded-on tabs to which the railing elements are attached. To guarantee fall protection, we recommend seeking professional assistance.

Securing garden gates and gates

How are garden gates attached?

The method of securing garden gates depends on the type of posts used and the size and weight of the gate. The following options are possible:

with eye bolts on 5 x 5 cm steel posts
with adjustable straps with mounting plate on existing stone posts or larger steel posts (10 x 10 cm)

Included in the delivery are a strike plate with screws, a tubular frame lock with adjustable rotation direction and the corresponding screws, as well as two eye bolts for attaching to our steel posts.

For on-site assembly, ideally two magnetic spirit levels and a drill with an M8 tap are required.

Eye bolts are necessary to attach your garden gate to steel posts. Detailed instructions on how to attach it using eye bolts can be found here.

Setting the steel posts in concrete is easily possible. You can find which tools we recommend and detailed instructions for setting your garden gate in concrete here.

How are gates attached?

The mounting of double-leaf gates depends on the type of mounting posts and the size and weight of the gate. The following options are possible:

with adjustable straps with mounting plate for existing stone posts
with adjustable straps with mounting plate for larger steel posts (10x10 cm)

Included in the delivery are a strike plate with screws, a tubular frame lock with adjustable rotation direction and the corresponding screws, as well as four adjustable hinges with a mounting plate.

In addition, you can purchase the corresponding 10 x 10 cm posts for concreting from us. To ensure you can use your gate without any problems, we also recommend the following accessories:

Lock cylinde
Modern lever handle set
Classic lever handle set
Locking mechanis

You will need the following accessories and tools to assemble your gate:

16x M8 25 mm screws (+ washers)
Drill with M8 tap
Spirit level (ideally two magnetic spirit levels)

Detailed instructions on how to assemble your gate can be found here.

Back to top