Buy wrought iron fence "Padua" online

Mitarbeiter beim anschweißen der Zierspitzen

Description

Minimalist and simple: Our "Padua" fence impresses with a timeless design that blends harmoniously into any garden. The "Padua" metal fence suits both modern and natural garden designs. This fence model is handcrafted from weather-resistant, solid wrought iron. The standard width per fence panel is 192.5 cm; the standard height is 90 cm. The basic structure of the model consists of two horizontal crossbars into which 14 vertically inserted square bars measuring 1.2 x 1.2 cm are fitted. You can purchase the "Padua" fence panel directly from us as the original manufacturer. We prioritize the highest quality, design standards, and customer satisfaction.

We recommend a minimum ground clearance of 5 cm during installation.

Note: Matching posts are not included with the purchase of the fence. However, these can be ordered separately under Posts & Accessories. This fence model is also available in a practical 10-metre set including posts.

Choose your own coating

We offer you the unique opportunity to freely choose the coating for your fence.

The following options are available: uncoated for an elegant rust look, with modern hot-dip galvanising in a matte silver tone, or with a high-quality duplex powder coating. Would you like your fence with custom dimensions? No problem – we also manufacture our products to measure. Visit eleo-fence.co.uk!

Technical Data

Model

Padua

Top / Finial

none

Shape

Straight

Width

30 cm - 192,5 cm

Weight uncoated

up to 20 kg

Rod diameter

1,2 cm

Height with tip

90 cm

Number of rods per element

Distance between rods

12 cm

Material

Solid wrought iron

Assembly

The fence panels can be attached to existing posts as well as to steel posts. You can order suitable steel posts for bolting or concreting in place for your fence here in our shop. Using a tap and die set, you will need to cut holes into the steel posts on-site, into which the slotted screws for attaching the fence panels are then inserted. We do not pre-drill these holes so that you can individually and flexibly adapt your fence to the unevenness of your ground by choosing the appropriate height for the drilling points.