Buy "Ancona" fence panels online

Mitarbeiter beim anschweißen der Zierspitzen

Description

Classic elegance with beautifully designed details: Our "Ancona" fence blends harmoniously into any garden. The spherical finials are a real eye-catcher. The "Ancona" metal fence is handcrafted from solid, weather-resistant wrought iron. The standard width of each fence panel is 192.5 cm, and the height, including the finials, is 90 cm.

The "Ancona" garden fence consists of 14 vertical, sturdy round bars spaced approximately 11 cm apart. The bars have a diameter of 1.6 cm. Horizontal crossbars at the top and bottom of the fence panel provide additional stability.

You can purchase the "Ancona" fence panel directly from us as the original manufacturer. We prioritize the highest quality, design standards, and customer satisfaction.

When installing the fence panel, we recommend a minimum ground clearance of 5 cm.

Note: Matching posts are not included with the purchase of the fence. However, these can be ordered separately under Posts & Accessories. This fence model is also available in a convenient 10-meter set including posts.

Choose your own coating

We offer you the unique opportunity to freely choose the coating for your fence.

The following options are available: uncoated for an elegant rust look, with modern hot-dip galvanising in a matte silver tone, or with a high-quality duplex powder coating. Would you like your fence with custom dimensions? No problem – we also manufacture our products to measure. Visit eleo-fence.co.uk!

Technical Data

Model

Ancona

Top / Finial

Ball-top Rod

Shape

straight

Width

96 cm or 192.5 cm

Weight uncoated

6.5 kg or 13 kg

Rod diameter

1.6 cm (hollow tube)

Height with tip

90 cm

Number of rods per element

Distance between rods

11,6 cm

Material

Wrought iron

Technische Zeichnung Zaun Ancona 192,5cm

Assembly

The fence panels can be attached to existing posts as well as to steel posts. You can order suitable steel posts for bolting or concreting in place for your fence here in our shop. Using a tap and die set, you will need to cut holes into the steel posts on-site, into which the slotted screws for attaching the fence panels are then inserted. We do not pre-drill these holes so that you can individually and flexibly adapt your fence to the unevenness of your ground by choosing the appropriate height for the drilling points.